22586VIC Certificate II in Integrated Technologies (Pre-vocational) (Robotics Control Stream)
Start on your path to future technology.
Integrated technology is the coming together of various technologies that were previously stand alone, into new and innovative integrated applications.
This qualification is directly aligned with priority industry areas where jobs are today, and into the future. As part of the state government Lower fees, local skills program, through to 31 December 2025 you'll only pay half the tuition fees (plus resource fee) capped at $1,200; or $400 if you're aged 15—24 or eligible for a concession.
^ You will pay half price for the tuition fees on the Lower fees, local skills qualifications, however other fees may apply such as Resource fees that are specific to your course. For full details see our Half price courses page.
Overview
Campus East Perth
When Semester 1, 2024 | Semester 2, 2024
Study Mode On campus
A robotic project driven learning program!
You'll gain foundation skills required by industries involved with automation and robotics. The units will be taught in a very hands-on approach through two projects involving simple robots.
You'll also learn the basics of electronics, programming, 3D printing and will be introduced to engineering drawing. Students will also gain skills in using basic hand tools.
You'll be equipped to take on entry level work in the fields of
- automation
- robotics
- electronics technician
- electronic engineering
- smart technologies
- mechatronics engineering
- electrical trades
- instrumentation trades
- Robotics configuration
- Network configuration
- CAD design
- 3D printing
- Robotics maintenance
I have the following attributes:
- Able to apply analytical and problem solving skills
- Good oral and written communication skills
- Able to work independently and as part of a team
Important information
Select your preferred campus and apply
Semester 1, 2024
Details
Course fees
(Tuition fee* $758.16 + Resource fee $95.00 )
(Tuition fee* $224.64 + Resource fee $95.00 )
Half price fees
The Lower fees, local skills (half price) discount and fee caps have been applied to the Tuition Fee total displayed under Course Fees. Tuition Fee capping is not reflected in the fees displayed when looking at the cost per unit. Please note that fee caps only apply to the calendar year, so multi-semester courses across more than one calendar year may have a higher fee. See the Half price courses page for more details.
Lower fees, local skills are available to residents of Western Australia, and temporary residents holding certain visa types. They are not available for people living outside of Western Australia, or international students. Full eligibility details are available on our Half price courses page.
Enquiries regarding fees can be made by calling us.
T 1300 300 822
*Fee disclaimers
The fees quoted are estimates only and are for the entire course for students enrolling on a full-time basis. Please view the full list of Fee disclaimers.
Please note fees listed include all units required to gain this qualification. If you're a continuing student and have successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in, to complete this course.
Enquiries regarding fees can be made by calling us.
Units
Core
National ID | Unit title |
---|---|
UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace |
VU23109 | Prepare to work in an integrated technologies environment |
VU23110 | Use routine work practices in an integrated technologies environment |
VU23111 | Apply electrotechnology knowledge and skills in integrated technologies work |
VU23112 | Use Computer Aided Drafting and Design software applications in integrated technologies work |
VU23113 | Carry out an integrated technologies project |
Elective
National ID | Unit title |
---|---|
VU22338 | Configure and program a basic robotic system |
VU22340 | Use 3D printing to create products |
VU22963 | Build and implement a basic network |
VU23119 | Install, set up and test an embedded control system |
Semester 2, 2024
Details
Course fees
(Tuition fee* $758.16 + Resource fee $95.00 )
(Tuition fee* $224.64 + Resource fee $95.00 )
Half price fees
The Lower fees, local skills (half price) discount and fee caps have been applied to the Tuition Fee total displayed under Course Fees. Tuition Fee capping is not reflected in the fees displayed when looking at the cost per unit. Please note that fee caps only apply to the calendar year, so multi-semester courses across more than one calendar year may have a higher fee. See the Half price courses page for more details.
Lower fees, local skills are available to residents of Western Australia, and temporary residents holding certain visa types. They are not available for people living outside of Western Australia, or international students. Full eligibility details are available on our Half price courses page.
Enquiries regarding fees can be made by calling us.
T 1300 300 822
*Fee disclaimers
The fees quoted are estimates only and are for the entire course for students enrolling on a full-time basis. Please view the full list of Fee disclaimers.
Please note fees listed include all units required to gain this qualification. If you're a continuing student and have successfully completed a lower-level qualification that is a prerequisite for this course, you'll only pay for the units that you need to enrol in, to complete this course.
Enquiries regarding fees can be made by calling us.
Units
Core
National ID | Unit title |
---|---|
UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace |
VU23109 | Prepare to work in an integrated technologies environment |
VU23110 | Use routine work practices in an integrated technologies environment |
VU23111 | Apply electrotechnology knowledge and skills in integrated technologies work |
VU23112 | Use Computer Aided Drafting and Design software applications in integrated technologies work |
VU23113 | Carry out an integrated technologies project |
Elective
National ID | Unit title |
---|---|
VU22338 | Configure and program a basic robotic system |
VU22340 | Use 3D printing to create products |
VU22963 | Build and implement a basic network |
VU23119 | Install, set up and test an embedded control system |
Get help
This form is only for course enquiries. If you would like to apply, please refer to the SELECT YOUR PREFERRED CAMPUS AND APPLY section above.